Connect with us now

Subscribe for the next deals!

Yachtmaster series

2.3m - 2.9m, V-shaped air floor, easy assemble and ultra light

Beachmaster series

2.3m - 4.2m, inflatable keel, foldable with firm flat non-skid floor

Reefmaster series

2.3m - 3.2m, marine alloy hulls- no secondary floor

Oceanmaster series

3.5m - 3.8m, alloy hull and secondary flat alloy floor

Fishmaster series

2.7m - 3.4m, GRP hull, wider beam and flat grip floor

Sportmaster series

3.4m - 7.3m, GRP RIB with steering consoles, seating etc

Kayak series

Complete with paddles, pump, repair kit, inflatable seats, carry bag and warranty

Trailers

Wide range to suit 3m to 7.5m boats

Outboard motors

Aakron outboards 2.5hp to 15hp + Mercury from 3.3hp

Accessories

Covers, footpumps, paddles and other accessories

Generators

For boats, motor-homes, the bach, a back-up for the house or for farmers and contractors

Inflatable boat features

Check out details of our Inflatable boat features below:

Shows main towing eye plus side rings for transom bridle to prevent flipping or yawing while being towed. Reef/Oceanmaster RIB Series

inflatable boat feature 1

Close-up of anchor bow roller and protective strip - All Aakron Inflatables have this useful feature except Getashore Series

inflatable boat feature 2

Shows lay-flat oar-locks, hogging with lots of grab rope and solid marine ply floor boards & non skid finish - Beachmaster Series

inflatable boat feature 3

Alloy Reefmaster hull showing internal tie down rings for fuel or gear bags plus davit and anchor fixing eye - Reefmaster/Oceanmaster RIB Series

inflatable boat feature 4

Shows Reefmaster towing eyes, outboard clamp plate and self-draining bung and cap plus nonskid floor strips - Reefmaster/Oceanmaster RIB Series

inflatable boat feature 5

Optional Extra: Pontoon and keel protection strips help prevent damage to the mother ship - Reefmaster/Oceanmaster RIB Series Inflatables

inflatable boat feature 6

Additional quality factors

We have very carefully selected only the best marine grade materials, reliable and conscientious suppliers from around the world and only employ top-class tradesmen for construction and assembly work.

  • Only heavy weight polymer/terylene composite fabrics especially produced for the inflatable boat market are used to construct the pontoons
  • Our alloy hulls are marine grade 3mm thick then epoxy coated and we pay meticulous attention to details like having a raised bow so you wont get wet punching into a chop
  • We fit extra towing rings so you will never have to worry about your towed boat flipping over in strong winds
  • We fit extra wear protection to the sides and underneath the pontoons
  • And finally we fit a bow roller and rope protection so you can anchor and retrieve with ease
+ +